2019 Land Pride FM2584

Call for Price

In Stock
Umpqua Valley Tractor
Primary Color
Stock #
Land Pride



Sturdy and compact.

Land Pride's FM25 Series Flail Mowers are built for use in vineyards, orchards, and recreational areas and will fit a wide variety of tractors. The spring-loaded belt-tensioning system makes it easy to tension belts for longer life. Cutting height is variable from 0" to 6". The rear access door and quick-change D-ring system (Duckfoot knives only) simplifies blade changes.

  • 84" Cutting widths: Wide selection of cutting widths to meet specific applications.
  • 30-80 hp tractor: Fits a large array of tractors to meet the needs of consumers, municipalities, and landscapers.
  • Spring-loaded, self-indicating, belt-tensioning system: Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes maintaining proper belt tension easy, and increases belt life.
  • 0"-6" Cutting: height Variable cutting height allows operators to scalp the ground, or leave a 1" to 6" cut.
  • 1", 1 1/2", & 2" Blade cutting capacity: Ducksfoot blade can cut up to 1" small brush, Heavy-duty Y blade can cut up to 1 1/2" brush, Hammer blade can cut up to 2" small saplings.
  • Sealed heavy-duty tapered roller rotor bearings: Sealed for protection from dust and debris, Withstand shock loads and deflection from heavy use.
  • Reverse rotor rotation: Brings the cut material up and over which allows it to be dispersed more evenly. Allows material to be shredded completely.
  • High knife tip speed: Knife tip speed 12,046 fpm provides a clean cut, creates a vacuum effect when using hammer or ducksfoot blades, and slices through saplings with great force when using heavy-duty Y blades.
  • Full width rear access door Allows for easy access to blades and rotor for replacing blades and cleaning out debris.
  • Quick-change D-ring blade system: Replace ducksfoot blades without any tools.
  • 3- ā€œ5Vā€ Section Powerband Belt: Powerband belt distributes load evenly, which prevents the belts from jumping off the drive when a shock load occurs.
  • Hitch offset: 10", The two position hitch allows the mower to be offset to the right for a closer cut alongside buildings, fences, and roadsides.
  • Three blade options: ducksfoot, hammer, heavy-duty Y: Three blade options to meet specific applications.
  • Accessible rotor: Rotor can be removed by unbolting cover plates and bearings.
  • Grease zerks on end caps of driveline cross journals: Intermediate and main driveline cross journals are easier to grease.
  • Standard removable roller scraper mounted with only two bolts: Keeps roller clean for consistent cutting height in wet conditions, Two bolt mounting makes it easy to remove to allow heavy dry cuttings flow freely over the roller.
  • Front safety chains: Protects operator and bystanders from debris.
  • Replaceable skid shoes: Prevents wear on end panels from ground contact.
  • Weight of Standard unit with optional ducksfoot rotor: 1236 lbs
  • Weight of optional rotors: Rotor with ducksfoot blades: 32 blades, 250 lbs; Rotor with heavy-duty Y blades: 48 blades, 292 lbs; Rotor with hammer blades: 24 blades, 301 lbs
  • Optional brush rake assembly: 62 lbs
  • Working width: 84"
  • Overall width: 96"
  • Drive cover height: 33"
  • Rotor rpm: 2450
  • Hitch: Cat. I & II
  • Gearbox rating: 80 hp
  • Driveline: Cat. 4
  • Offset hitch: Center or 10" Right
  • Blade tip speed: 12,046 fpm
  • Blade attachment: D-ring for ducksfoot blades, C-clamp for heavy-duty Y and hammer blades
  • Rotor bearings: Spherical roller bearing
  • Brush rakes (standard): 11
  • Rotor diameter: 5" With reinforcing bars
  • Rotor rotation: Reverse
  • Cutting height: 0"-6"
  • Cutting capacity: Ducksfoot: 1", Heavy-duty Y blades: 1.5", Hammer blades: 2"
  • Rear roller diameter: 5.56"
  • Hood/deck thickness: 10 Ga



Working Width
84 in.
96 in.
57 3/4 in.
1236 lb.
Recommended HP
80 hp

Related Products